PC Tab Blast Alert Stand-alone System! Use for Projectors, Computers, or any equipment with a high risk of theft! The PC TAB Blast Alert is a local alarm that attaches to your equipment.  A local alarm is triggered if the PC Tab sticker is removed, or the connecting wire is cut.  Once tripped, the siren sounds for over 2 hours, or until the key is inserted. There's no motion trigger, so no false alarms. The Blast Alert alarm box can be attached directly to your equipment, forcing a thief to either carry a sounding alarm, or abandon the attempt. To secure multiple pieces of equipment, attach the alarm box to a stationary object and attach the PC Tab sensor to your equipment.  Additional PCTab sensor packs (BA-730) can be purchased to secure multiple items in a daisy chain fashion.	Protects: LCD Projectors Computers Printers Routers Plasma Displays LCD Panels Burners Hubs Any other high risk equipment!
	FEATURES SPECIFICATIONS KIT CONTENTS

Features:

• 117dB Siren
  Both heard and felt
• Long Battery Life
  No regular battery changes. Only if the siren has been activated for over an hour, or after 4-5 years monitoring. (actually, it would take 50 years to drain the battery, but we suggest you keep it fresh)
• Stainless Steel Case
  We use the strongest grade made. Hard to cut and hard to pry.
• Easy to Install
  No Drilling. No risk to your equipment warranty. Installed in about 5 minutes
• Enough adhesive will be included to secure the number of units purchased. (one glue cartridge will secure up to 6 units)
• Keying options
  Units are available keyed alike or keyed different.

BACK TO TOP

Kit Contents:

• 1 alarm box unit
• 1 PC Tab sensor
• 1 PC Tab 6' wire
• 1 end-of-line terminator
• adhesive
  

Kit Contents: BA-730 (purchase one of these for each additional piece of equipment you wish to secure.)

• 1 PC Tab sensor
• 1 PC Tab 6' wire
  

Other wire lengths available, call for details.

BACK TO TOP

Specifications

Applications:

• Can be used on any surface with a free 2.25 x 4.625 inch reasonably flat area. Adheres on all metals and most plastics (except polypropylene)

Alarm Box Construction:

• Alarm housing, mounting plate, and case sealing bracket fabricated from high grade stainless steel
• Dimensions 2.375 x 4.5 x 1.25 inches

Power:

• 9 volt industrial alkaline battery
• 650 milliamp hour capacity
• 1 microamp monitoring current
• 200 milliamp current at full alarm.
• Battery life 50 years monitoring, subject to battery integrity
• Battery life 2 hours at full alarm

Acoustic Generator:

• Custom Multice alarm
• 17 dB sound pressure @ 1 foot
• Rapid variable (siren like) waveform

Locks:

• Ilco 5 wafer cam lock
• removable core
• available keyed alike or keyed differently

Adhesive:

• Methylmethacrylate kit ("Plastic Welder")
• 2 part exothermic cure non toxic adhesive
• 3,500 psi strength on all metals and most plastics (except polypropylene) Very high impact resistance (eg. hammer blows)
• 4 minute working time; 80% strength in 20 minutes; full strength in 24 hours.
• Impervious to water or solvents when cured.

Warranty:

• One year repair or replacement

BACK TO TOP