1-800-466-7636
|
| PRODUCT INDEX | THEFT SOLUTIONS | ORDERING INFO | REQUEST INFO | CONTACT US | ABOUT US | RESELLERS | REWARDS PROGRAM | WHITE PAPERS | HOME PAGE |
| see more ratings and Client Testimonials | |
| [What was your favorite part of the experience?] The product worked as advertised. | |
| (anonymous) on 04/22/2013 | |
| [What was your favorite part of the experience?] COMMUNICATION AND SERVICE THE BEST | |
| (anonymous) on 04/17/2013 | |
| The process was fast and easy, the person I talked to was knowledgeable and helpful. I also received my order very quickly. | |
| Steve from Michigan on 03/07/2013 | |
| Ordering was very easy and our shipment arrived very quickly. We ordered some incorrect items and CSP made it so easy to return the wrong item and order the correct one. I would recommend this company to everyone. | |
| Cheryl from OH on 02/15/2013 | |
| When I placed my order, the person I spoke with on the phone was very friendly, caring, and knowledgeable. | |
| HR, PA on 01/21/2013 | |
PC Tab Alarm System - System Components
Not sure what you need?
CLICK HERE to
determine which components are necessary for your computers.
PC Tab Security Sensor - PCT-SNSR.2The PC Tab Security Sensor is the heart of the PC Tab Alarm System. There is a tamper switch built into the PC Tab sensor that will set off an alarm if detached from the equipment it is protecting. The sensor is attached using 3M tape or the glue-on base place. If someone removes the sensor from the equipment being protected, the alarm is set off, notifying a security department (or monitoring service). The visible LED tamper indicator makes finding the disconnected sensor easy. If you need to remove the sensor for machine maintenance, you only have to replace the 3M tape. If you are using the glue-on base plate, you just need to unsnap the sensor from the base plate, and reattach when done. This makes the overall cost very effective! (if you are using the sensor with tape and it is removed for any reason, whether for maintenance or if it has been tampered with, you MUST replace the tape otherwise false alarms may ensue). |
The
PC TAB sensor 2 now has 350% more surface area, to avoid
false alarms! For those who prefer a more permanent solution, we
have an optional glue down plate, rather than using the 3M tape.
|
Replacement Tape - PCT-SNSR.Tape-LargeReplacement tape for the PCT-SNSR.2 Version 2 Sensor. This tape must be replaced whenever a sensor is removed from equipment, for whatever reason. Otherwise, false alarms may ensue. A good ratio is to have 1 replacement tape on hand for every 10 sensors you have installed. This way you should never run short! |
|
Replacement Glue-on Base Plates - PCT-SNSR.2.BaseReplacement glue-on base plates for the PCT-SNSR.2 Version 2 Sensor. These base plates only need to be replaced if you are using an existing sensor on a new piece of equipment. A good ratio is to have 1 replacement base plate on hand for every 10 sensors you have installed. This way you should never run short! |
|
Replacement Tape - PCT-SNSR.Tape-smallReplacement tape for the original PCT-SNSR Sensor. |
|
Connecting Wires -
|
|
RJ-11 Adapter - PCT-11SN
|
|
| In a typical installation, you would install a standard RJ-11 phone jack at the end of your zone wire, near the equipment to be secured. This RJ-11 adapter plugs into that jack to convert to the specialty PC Tab wires. An RJ-45 adapter is also available in cases where you want to utilize an unused network wire for your zone wiring. | 
|
End-of-Line Terminator - PCT-T56The End-of-Line Terminator provides for a supervised alarm wire. 5.6K resistance value. This terminator needs to be plugged into the unused port in the very last security sensor in the cluster. If using an alarm panel other than our DSC panel, you will need the Universal Contact Module to ensure proper operation. |
|
Universal Contact Module - PCT-UCMWhen using the PC Tab system on a panel other than a DSC alarm panel, you must use the Universal Contact Module inside your alarm panel to ensure proper operation. The Universal Contact Module makes the PC Tab fully compatible with any alarm panel. It monitors the PC Tab sensors and wires with a fully supervised loop while providing a dry contact to your panel. One contact module is needed for each cluster (zone). You do not need the Universal Contact Module if you are using a DSC Alarm Panel. Board size: 3" x 11/16". |
|
Central Alarm Panel - PCT-APIn standing with the simplicity and full modular design of the system, the PC Tab Control Unit is a full alarm panel designed to just plug in and use with no more setup than changing the PIN code. Base Alarm Panel handles up to 8 'zones' or cluster of computers
on one unit |
|
8-Zone Expander Module - PCT-APE
Up to three 8-zone Expander Modules can be added to the Central Alarm Panel to protect up to 32 'zones' or computer clusters on one panel.
 - Create An Account - Track/View Orders - Load/View Quotes
|
||||||||||
