Kablit Steel Cables

CBL-810  - 10' LOOP AROUND CABLE AND LOCK - Featuring MasterLock™ brand locks. One end of the steel cable is permanently attached to the lock. The other end attaches to the equipment and loops back into itself.  Locks can be keyed alike or differently at no extra charge

SPECS
BROCHURE
INSTALLATION INSTRUCTIONS

CBL-830 - 6' POINT TO POINT CABLE AND LOCK - Featuring MasterLock™ brand locks. One end of the steel cable has a 5/8" diameter steel bullet.  This cable is passed through the fasteners on the computer.  It is then passed through a fastener attached to the desk or an opening in the workstation which the lock cannot fit through. Locks can be keyed alike or differently at no extra charge.

SPECS
BROCHURE
INSTALLATION INSTRUCTIONS

CBL-830/L - 6' POINT TO POINT CABLE AND LOCK - Featuring MasterLock™ brand nonrekeyable locks. This security cable uses a smaller lock and thinner cable which is able to pass through the computer's security bracket which is found on newer models of the Dell, IBM, Compaq, etc. Comes with a washer included to prevent the bullet from passing through the security slot.

SPECS
BROCHURE
INSTALLATION INSTRUCTIONS

DSC-550 - GLUE-ON EPOXY DISC - Used when securing equipment that does not have surface screws. Also used on monitors, printers, or any other equipment that needs securing. Measures 1 7/8" in diameter. This fastener adheres permanently to your equipment with a commercial strength instant adhesive gel. Enough adhesive will be supplied to secure the number of discs ordered. Can be used on plastic, wood, or metal.

SPECS
BROCHURE
INSTALLATION INSTRUCTIONS

PLT-591 - RECTANGULAR EPOXY PLATE - Similar to the Disc, but has been designed to be used where space to adhere is short or narrow.  Measures 7/8" x 2 1/4". This fastener adheres permanently to your equipment with a commercial strength instant adhesive gel. Enough adhesive will be supplied to secure the number of rectangles ordered. Can be used on plastic, wood, or metal.

SPECS
BROCHURE
INSTALLATION INSTRUCTIONS

HXN-510 - HEX FASTENER - The hex fastener attaches to your equipment using existing surface mounted screws. Once installed, the cable passes through the fastener and the screw is concealed, preventing internal component theft!

SPECS
BROCHURE
INSTALLATION INSTRUCTIONS

XLK/U - Scissor Clip - This Universal Scissor Clip is designed to fit into the existing security slot located in most laptops and most newer desktops. The scissor clip MUST be used with either a cable or a padlock. 

The use of the bracket which is included with the scissor clip enables it's use with ANY of our Steel Cable Kits or Padlocks.

SPECS
INSTALLATION INSTRUCTIONS

TRP-575 - CABLE TRAP - The cable trap secures mouse cables, keyboard cables, electrical cables on monitors, printers, fax machines or any other type of equipment where the cable is fixed to the unit. Can be used with a cable or padlock.

SPECS

TRP-570 - CABLE TRAP - The cable trap secures mouse cables, keyboard cables, electrical cables on monitors, printers, fax machines or any other type of equipment where the cable is fixed to the unit.

SPECS
BROCHURE
INSTALLATION INSTRUCTIONS

FLBR - $2.95 - TWO-HOLED FLAT BRACKET - The Flat bracket give you the option to create a loop round an immovable object such as a table or workstation with a point-to-point cable.

SPECS
BROCHURE
INSTALLATION INSTRUCTIONS